You have no items in your shopping cart.
Welcome to SAH Electronics Shop for Industrial Automation & Control
Industrial electronics and automation solutions all in one place
SAH is automation products manufacturer and distributor
We are electrical automation and industrial control specialists
SAH Shop is one-stop source for all automation professionals
Related Products
Check items to add to the cart or select all
Details
| Control Specifications | Output Frequency Range | 0.10Hz ~ 400.00Hz | |||||
| Frequency Setting Resolution | Digital input: 0.1Hz, analog input: 0.1% of maxium output frequency | ||||||
| Output Frequency Accuracy | 0.1Hz | ||||||
| V/F Control | Setting V/F curve to satisfy various load requirements. | ||||||
| Torque Control | Auto increase: auto raise torque by loading condition; Manual increase; enable to set 0.0 ~ 20.0% of raising torque. | ||||||
| Multifunctional Input Terminal | Four multi-function input terminals, realizing functions including fifteen section speed control, program running, four-section acceleration/deceleration speed switch, UP/DOWN function and emergency stop and other functions. | ||||||
| Multifunctional Output Terminal | 1 multi-function output terminals for diaplaying of running, zerospeed, counter, external abnormity, program operation and other information and warnings. | ||||||
| Accleration/ deceleration Time Setting | 0 ~ 999.9s acceleration/deceleration time can be set individually. | ||||||
| Other functions | PID Control | Built-in PID control | |||||
| RS485 | Standard RS485 communication function (MODBUS) | ||||||
| Frequency Setting | Analog input: 0 to 10V, 4 to 20mA can be selected; Digital input: Input using the setting dial of the operation panel or RS485 or UP/DOWN. Note: AV1 terminals can be used to select an analog voltage input (0-10V) and an analog current input (4-20mA) through the switch J2. | ||||||
| Multi-speed | Four multifunction input terminals, 15 section speed can be set. | ||||||
| Automatic voltage regulation | Automatic voltage regulation function can be selected. | ||||||
| Counter | Built-in 2 group of counters | ||||||
| Protection/Warning Function | Overload | 150%, 60 second (Constant torque) | |||||
| Over Voltage | Over Voltage Protectation can be set. | ||||||
| Under Voltage | Under Voltage protection can be set. | ||||||
| Other Protections | Output shortcircuit, over current, an parameter lock and so on. | ||||||
| Environment | Ambient Temperature | -10ºC to 40ºC (non-freezng) | |||||
| Ambient Humidity | Max. 95% (non-condensing) | ||||||
| Altitude | Lower than 1000m | ||||||
| Vibration | Max. 0.5G | ||||||
| Structure | Cooling Mode | Forced air cooling | |||||
| Protective Structure | IP 20 | ||||||
| Installation | Wall-mounted or standard 35mm rail mounting | ||||||
| Weight | val_6 | ||||||
| Panel | Mounting Sizes | ||||||
| W (mm) | val_1 | ||||||
| H (mm) | val_2 | ||||||
| D (mm) | val_3 | ||||||
| D1 (mm) | val_4 | ||||||
| Fixing Aperture (mm) | val_5 | ||||||
Main Features
| SKU | FREG503 |
|---|---|
| Supplier | NIETZ |
| Rated Power | 2.2kW |
| Product Series | NL1000 |
| Type | Micro Inverter |
| Purpose | General Purpose |
| Input Phase | 1-Phase 1-3 |
| Output Phase | 3-Phase |
| Output Current | 11A |
| Input Voltage | 170-240V, 50/60Hz |
| Output Voltage | 3 x 220V |
| Output Frequency | 0.1 – 400Hz |
| Communications | MODBUS |
| Braking Unit | No |
| Braking Resistor | No |
| Matching Braking Resistor | No |
| Protection Rating | IP20 |
| Dimensions (H x W x D) | 142mm x 72mm x 112mm |
| CSV Data | 72,142,105,112,4.5,0.9kg#nl1000-panel_3.jpg,nl1000-dimensions_3.jpg |
Additional Information
Thera are no additional information for this product.
