Zoom

Photos are for illustration purpose only!

RSTB

Quality Rating:

Availability: 278 pcs.

Phase Supply Control Relay

3 phase, Output Relay NO and NC 10A 250VAC

Designed to monitor 3 phase supplies and to protect motors and other loads against the faults.

Technical Manual for RSTB
€12.00

SKU: RSTB

Prices are wholesale, without VAT
and are subject to change without notice!

Details

General technical specification for RSTB phase protection
Main Features
Output RelayNO and NC 10A 250VAC
Power Supply3 phase 350~450VAC 50/60Hz
Mechanical Life10.000.00 operations
Electrical Life100.00 operations at rated load
Ambient Temperature-10 to +60°C
Ambient Humidity45~85%RH
MountingAt DIN rail
IndicationsGreen LED indicates relay state
Red LED indicates fault
WiringDimensions (mm)
RSTB WiringRSTB Dimensions
Description
3 phase supply control relay (Phase sequence relay) is designed to monitor 3 phase supplies and to protect motors and other loads against the faults listed below.
- Monitoring of rotational direction of phases
- Detection of complete failure of one or more of the phases
- Undervoltage detection (-10%)
- Overvoltage detection (+10%)
- Detection of phase asymmetry (imbalance) (±10%)
- Adjustable time delay from 0.1s to 10s
- SPDT 10A 250VAC(Resistive load) switch
The relay operates if any of the conditions occurs.
The relay releases if any of the conditions fails.
There is a Time Delay between the relay action and the condition occurs (except rotational direction of phases error ) to avoid very short interruptions or other momentary failures.
A selector switch allows selection of an adjustable time delay from 0.1s to 10s.
When the supply returns towards its rated value, the relay is re-energised according to the hysteresis value (5%).

Main Features

SKURSTB
SupplierDHC WENZHOU
Dimensions (H x W x D)60mm x 24mm x 58mm
CSV DataN/A

Additional Information

Thera are no additional information for this product.