You have no items in your shopping cart.
Welcome to SAH Electronics Shop for Industrial Automation & Control
Industrial electronics and automation solutions all in one place
SAH is automation products manufacturer and distributor
We are electrical automation and industrial control specialists
SAH Shop is one-stop source for all automation professionals
Main Features | |||
Startup mode | 1. Current limiting startup: low down the start voltagelimit the start current by keypad settingrandom adjusting. | ||
2. Voltage ramp startup: smooth start for motor, reduce the concussion of electric network by start current. | |||
3. Kick startup | |||
Stop mode | 1. Free stop 2. Soft stop | ||
Control mode | Keypad control, Terminal control, Modbus control | ||
System control function | 1. The outputinput connect point can be the programmable point, internal intelligentized programs can check the status of drive-system. | ||
2. Standard internal port (MODBUS) can realize PC/PLC control. | |||
3. LED display, operator can set all the parameter program by keypad control. | |||
4. Keypad control remote control. | |||
5. Delay relay output function | |||
6. Malfunction output relay function | |||
7. One soft starter control more than one motor. | |||
System protection function | 1. Over current protection | ||
2. Over load protection | |||
3. Out phase protection | |||
4. Over heat protection | |||
Communication | MODBUS | ||
Fault functions | 1. Fault Diagnosis | ||
2. The fault can be displayed or relay output can be used | |||
Technical Parameters | |||
3-Phase power supply | AC 380V±20%, 50Hz | ||
Nominal current | 30A~630A | ||
Motor power | 15~315KW (380V) | ||
Startup mode | Voltage ramp startup (1120 seconds, adjustable); | ||
Current limiting startup (150~400%, adjustable); | |||
Voltage kick startup | |||
Stop mode | Free stop; soft stop (160seconds , adjustable) | ||
Relay output | Delay running output; fault output; full voltage output (by pass) [contact dot: 5A, 250VAC] | ||
Protection function | Phase loss of input, over-load, short circuit, over-heating, and etc. | ||
Safety degree | IP20 | ||
Cooling mode | Cooling naturally | ||
Environment conditions | Environment temperature: -10°C~+50°C | ||
Relative humidity: ≤95%(20°±5°) | |||
Free from flammable gas, explosive gas and corrosive gas, free from electric dust, to be installed indoors with good ventilation | |||
Vibration below 0.5G | |||
If the altitude is above 2000m, the capacity should be decreased accordingly for application. | |||
Mounting Sizes (mm) | |||
A | val_1 | ||
B | val_2 | ||
C | val_3 | ||
E | val_4 | ||
F | val_5 | ||
Hole Dia | val_6 |
SKU | STA008 |
---|---|
Supplier | EURA DRIVES |
Product Series | HFR1000 |
Contactor | No |
Rated Power | 110kW |
Current | 218A |
Voltage | 380V |
Protection Rating | IP20 |
Communications | RS485 |
Dimensions (H x W x D) | 510mm x 260mm x 194mm |
CSV Data | 510,260,194,389,232.5,Φ8.5#hfr1000-mounting-sizes-b.jpg |
Thera are no additional information for this product.