You have no items in your shopping cart.
Welcome to SAH Electronics Shop for Industrial Automation & Control
Industrial electronics and automation solutions all in one place
SAH is automation products manufacturer and distributor
We are electrical automation and industrial control specialists
SAH Shop is one-stop source for all automation professionals
Item | Item description | ||||
Input | Rating volt., frequency | 1 phase 220V, 50Hz / 60Hz | |||
3 phase 380V, 50Hz / 60Hz | |||||
Allowed work volt. range | 200~260V | ||||
320~460V | |||||
Output | Voltage | 0 – 380V | |||
Frequency | 0 – 600Hz | ||||
Over loading capacity | G type: 150% of rating current for 1 minute | ||||
P type: 120% of rating current for 1 minute | |||||
Control Performance | Control mode | Vector control, PG vector control, open-loop V/F control, torque control, PG torque control | |||
Velocity control precision | ±0.5% rated synchronous speed ( vector control ) | ||||
±0.1% rated synchronous speed (PG vector control) | |||||
±1% rated synchronous speed (V/F control) | |||||
Speed regulation range | 1: 2000 (PG vector control) | ||||
1: 100 (vector control) | |||||
1: 50 (V/F control) | |||||
Start-up torque | 1.0Hz: 150% rated torque (V/F control) | ||||
0.5Hz: 150% rated torque (vector control) | |||||
0Hz: 180% rated torque (PG vector control) | |||||
Speed fluctuation | ±0.3% rated synchronous speed (vector control) | ||||
±0.1% rated synchronous speed (PG vector control) | |||||
Torque control precision | ±10% rated torque ( vector control, torque control) | ||||
±5% rated torque (PG vector control, PG torque control) | |||||
Torque response | <20ms ( vector control) | ||||
<10ms (PG vector control) | |||||
Frequency precision | Digital setting: max. frequency x ±0,0l% | ||||
Analog setting: max.fequency x ±0,5% | |||||
Frequency resolution | Analog setting | 0.1% of max. frequency | |||
Digital setting precision | 0.01Hz | ||||
Exterior impulse | 0.1% of max. frequency | ||||
Torque boost | Automatic torque boost; manual torque boost 0.1~1 2.0% | ||||
V/F curve (volt. Frequency characteristic) | Setting rated frequency at the range of 5x 650Hz, by choosing constant torque, degressive torque 1,degressive torque 2,degressive torque 3,self-defined V/F total 5 kinds ofcurve | ||||
Acceleration / Deceleration curve | Two modes: straight line acceleration and deceleration; S curve acceleration and deceleration; 15 kinds of acceleration and deceleration time, time unit (0.01s, 0.1s, Is) for option , max. time for 1000 minutes. | ||||
Running Function | Running command specified channel | Keypad specified, control terminal specified, communication specified can switch through various means | |||
Running frequency specified channel | Main & auxiliary specified to a realize one main adjusting and one fine control. Digital specified, analog specified, pulse specified, pulse width specified, communication specified and others, which can be switched by many means at any time. | ||||
Binding function | Run command channel and frequency specified channel can bind together randomly and switch synchronously | ||||
Input and output characteristics | Digital input channel | Channel 8 for universal digital input, max. Frequency lKHz, channel 1 can be used as pulse input channel, max. Input 50KHz, which can be expanded to channel 1 4 | |||
Analog input channel | Channel 2 for analog input channel, All can choose 4~20mA or 0~10V output, AI2 is differential input channel, 4~20mA or -10~10V for option, which can be expanded to channel 4 analog input | ||||
Analog output channel | Channel 2 for analog signal output, AOl can choose 4~20mA or 0~10V, A02 can choose 4~20mA or 0~10Vto achieve setting frequency, output frequency and other physical quantity output, which can be expanded to channel 4 analog output | ||||
Pulse output channel | 0.1 ~ 20KHz pulse square signal output to achieve setting frequency, output frequency and other physical quantity output | ||||
Unique feature | Rapid current limiting | Limit inverter over current to the greatest point, and make it run more stably | |||
Monopulse control | Suitable for working site where need one button to control inverter start and stop, first press to start, then press to stop, and that cycle repeats. Its very simple and reliable | ||||
Fixed length control | Realize fixed length control | ||||
Timing control | Timing control function: setting time range 0.1 Min – 6500.0 Min | ||||
Virtual terminal | Five group virtual input & output 10 can realize simply logical control | ||||
Keypad | Keypad display | The parameters as setting frequency, output frequency, output voltage, output | |||
Button Locked | Lock all or part of the buttons | ||||
Protection function | Motor power on Shot circuit test, input & output phase loss protection, over-current protection, over voltage protection, under voltage protection, over heat protection, overload protection, under load protection, relay absorption protection, terminal protection and no stop protection under power off. | ||||
Ambient | Application site | Indoor, not bare to sunlight, no dust, no corrosive gas, no flammable gas, no vapor, no water drop or salt etc. | |||
Altitude | Under 1 000 meter. ( above 1 000 meter require to reduce volume to use, output current reduce about 10% of rated currenvolt per 1000 meter high) | ||||
Ambient temperature | -10°C~+50°C | ||||
Ambient humidity | Smaller than 95%RH, no drop condenses | ||||
Vibration | Smaller than 5.9 M/S2(0.6g) | ||||
Storage temperature | -40~+70ºC | ||||
Configuration | Defending grade | IP20 | |||
Cooling mode | Forced air cooling and natural | ||||
Mounting mode | Wall hanging or cabinet installation | ||||
Panel Dimensions | Mounting Sizes (mm) | ||||
A | val_1 | ||||
B | val_2 | ||||
W | val_3 | ||||
H | val_4 | ||||
D | val_5 | ||||
D1 | val_6 | ||||
Hole | val_7 |
Braking Resistors | |||
Model | Resistor | 50% Braking Rate | 10% Braking Rate |
EN600-2S0007 | ≥ 100Ω | ≥ 1.5kW | ≥ 250W |
EN600-2S0015 | ≥ 70Ω | ≥ 2.0kW | ≥ 400W |
EN600-2S0022 | ≥ 50Ω | ≥ 3.0kW | ≥ 600W |
EN600-2S0037 | ≥ 30Ω | ≥ 5.0kW | ≥ 1,5kW |
EN600-4T0007G/0015P | ≥ 300Ω | ≥ 1.0kW | ≥ 250W |
EN600-4T0015G/0022P | ≥ 300Ω | ≥ 1.0kW | ≥ 250W |
EN600-4T0022G/0037P | ≥ 300Ω | ≥ 1.0kW | ≥ 250W |
EN600-4T0037G | ≥ 125Ω | ≥ 2.0kW | ≥ 400W |
EN600-4T0055G/0075P | ≥ 80Ω | ≥ 3.8kW | ≥ 750W |
EN600-4T0075G/0110P | ≥ 80Ω | ≥ 3.8kW | ≥ 750W |
EN600-4T0110G/0150P | ≥ 50Ω | ≥ 5.0kW | ≥ 1.0kW |
EN600-4T0150G/0185P | ≥ 40Ω | ≥ 7.5kW | ≥ 1.5kW |
EN600-4T0185G/0220P | ≥ 27Ω | ≥ 9.0kW | ≥ 1.8kW |
EN600-4T0220G/0300P | ≥ 22Ω | ≥ 11kW | ≥ 2.2kW |
EN600-4T0300G/0370P | ≥ 19Ω | ≥ 15kW | ≥ 3kW |
EN600-4T0370G/0450P | ≥ 16.8Ω | ≥ 18.5kW | ≥ 3.7kW |
EN600-4T0450G/0550P | ≥ 13Ω | ≥ 22kW | ≥ 4.5kW |
EN600-4T0550G/0750P | ≥ 11Ω | ≥ 28kW | ≥ 5.5kW |
SKU | FREG099 |
---|---|
Supplier | ENC |
Rated Power | 0.75kW |
Product Series | EN600 |
Type | High Performance Vector |
Purpose | Vector Regulation |
Input Phase | 1-Phase 1-3 |
Output Phase | 3-Phase |
Output Current | 4A |
Input Voltage | 220V, 50/60Hz |
Output Voltage | 3 x 220V |
Output Frequency | 0 – 600Hz |
Communications | MODBUS |
Braking Unit | No |
Braking Resistor | No |
Matching Braking Resistor | ≥100Ω, 50% Braking Rate ≥1.5kW, 10% Braking Rate ≥250W |
Protection Rating | IP20 |
Dimensions (H x W x D) | 200mm x 115mm x 151mm |
CSV Data | 104,186,115,200,151,--,5#en600a-mounting-sizes.jpg,en600-panel-dimensions.jpg |
Thera are no additional information for this product.