You have no items in your shopping cart.
Welcome to SAH Electronics Shop for Industrial Automation & Control
Industrial electronics and automation solutions all in one place
SAH is automation products manufacturer and distributor
We are electrical automation and industrial control specialists
SAH Shop is one-stop source for all automation professionals
Details
| Item | Item description | ||||||
| Input | Rating volt., frequency | 3 phase 380V, 50Hz/60Hz; single phase 220V, 50Hz/60Hz | |||||
| Allowed work volt. range | 3 phase voltage: 320V~460V; single phase voltage: 200V~260V | ||||||
| Output | Voltage | 380V grade: 0~380V; 220V grade: 0~220V | |||||
| Frequency | from 0Hz to 400Hz | ||||||
| Over loading capacity | 150% of rating current for1 minute | ||||||
| 200% of rating current for 0.5 second | |||||||
| Control Performance | Control mode | Optimum space voltage vector SVPWM constant volt. Frequency ratio V/F control | |||||
| Speed regulation range | 1 : 100 | ||||||
| Start-up torque | 100% of rating torque at low frequency | ||||||
| Running speed stable state precision | ≤ 0.5% of rating synchronous speed | ||||||
| Frequency precision | Digital setting: max. frequency x ± 0.01% | ||||||
| Analog setting: max. frequency x ± 0.5% | |||||||
| Frequency resolution | Analog setting | 0.1% of max. frequency -+96 | |||||
| Digital setting | 0.01 Hz | ||||||
| Exterior pulse | 0.5% of max. frequency | ||||||
| Torque boost | Automatic torque boost, manual torque boost 0.1%~20.0% | ||||||
| V/F curve | Set rating frequency randomly at range of 5~400Hz, can choose constant torque, digressive torque 1, digressive torque 2, digressive torque 3 in total 4 kinds of curve | ||||||
| Accelerating decelerating curve | 2 modes: straight line accelerating decelerating and S curve accelerating decelerating; 7 kinds of accelerating decelerating time (unit minute/second can be optioned), max. time 6000 minutes. | ||||||
| Brake | Power consumption brake | Exterior brake resistance | |||||
| DC brake | Optional start-up and stop, action frequency 0~15Hz, action volt. 0~15%, action time 0~20.0s | ||||||
| Jog | Jog frequency range: 0.50Hz~50.00Hz; jog accelerating decelerating time 0.1~60.0s can be set | ||||||
| Multi section speed running | Realized by interior PLC or control terminal | ||||||
| Interior PID controller | Be convenient to make closed-loop system | ||||||
| Automatic energy save running | Optimize V/F curve automatically based on the load to realize power save running | ||||||
| Automatic volt. regulation AVR | Can keep constant output volt. When power source voltage varies. | ||||||
| Automatic current limiting | Limit running current automatically to avoid frequent over-current which will cause trip | ||||||
| Running function | Running order specified channel | Key pad specified, control terminal specified, serial port specified | |||||
| Running frequency specified channel | Digital provision, analog provision, impulse provision, serial port provision, combined provision, can be switched at any time by kinds of method | ||||||
| Pulse output channel | Impulse square wave signal output of 0~20KHz, can realize output of physical parameter such as setting frequency, output frequency etc. | ||||||
| Analog output channel | 1 channel of analog signal output, AO channel can be 4~20mA or 0~10V; through it the inverter can realize output of physical parameter such as setting frequency, output frequency etc. | ||||||
| Keypad | LED display | Can display setting frequency, output frequency, output voltage, output current etc. in total 14 kinds of parameter | |||||
| Lock the button | Lock all or part of the buttons(analog potentiometer can’t be locked) | ||||||
| Protection function | Over-current protection, over-voltage protection, lack-voltage protection, over-heat protection, over-load protection, missing phase protection (in option) etc. | ||||||
| Ambient | Use ambient | Indoor, not bare to sunlight, no dust, no corrosive gas, no flammable gas, no oil fog, no vapor, no water drop or salt etc. | |||||
| Altitude | Lower than 1000m | ||||||
| Ambient temperature | -10~+40ºC (under ambient temperature 40ºC ~50ºC, please reduce the volume or strengthen heat sink) | ||||||
| Ambient humidity | Smaller than 95%RH, no condensation water | ||||||
| Vibration | Smaller than 5.9 m/s2 (0.6g) | ||||||
| Storage temperature | -40~+60oC | ||||||
| Configuration | Defending grade | IP20 | |||||
| Cooling mode | By fan with automatic temperature control | ||||||
| Mounting mode | Wall hanging | ||||||
| Panel Dimensions | Mounting Sizes | ||||||
| W (mm) | val_1 | ||||||
| H (mm) | val_2 | ||||||
| D (mm) | val_3 | ||||||
| D1 (mm) | val_4 | ||||||
| Fixing Aperture (mm) | 5 | ||||||
Main Features
| SKU | FREG0141 |
|---|---|
| Supplier | ENC |
| Rated Power | 2.2kW |
| Product Series | EDS-A200 |
| Type | For 1-Phase Motors |
| Purpose | General Purpose |
| Input Phase | 1-Phase 1-1 |
| Output Phase | 1-Phase |
| Output Current | 10A |
| Input Voltage | 200-260V, 50/60Hz |
| Output Voltage | 1 x 220V |
| Output Frequency | 0 – 400Hz |
| Communications | MODBUS |
| Braking Unit | Yes |
| Braking Resistor | No |
| Matching Braking Resistor | No |
| Protection Rating | IP20 |
| Dimensions (H x W x D) | 170mm x 125mm x 152mm |
| CSV Data | 125,170,123,135#eds800-mounting-sizes_5_2.jpg,eds800-panel-dimensions_5_2.jpg |
Additional Information
Thera are no additional information for this product.
